IB IL AI 2-HART-PAC

https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline, Analog input terminal, Analog inputs: 2, 4 mA ... 20 mA, 0 mA ... 25 mA, connection method: 2-wire, transmission speed in the local bus: 500 kbps, HART functionality, HART protocol transmission, degree of protection: IP20, including Inline connectors and marking fields Product Description The terminal is designed for use within an Inline station. It allows communication with smart field devices using the standardized communication protocols INTERBUS and HART. It provides both analog and digital communication. The analog signal transmits the process information. The modulated digital signal enables bidirectional communication to the sensor (with HART capabilities) at the same time. Your advantages  Two differential signal inputs for current sensors  Connection of sensors in 2-wire technology (active and passive sensors)  Current ranges: 4 mA ... 20 mA, 0 mA ... 25 mA  Both channels preset to the 4 mA ... 20 mA measuring range and IB IL format  Transmission of the HART protocol with PCP  Measured values can be represented in three different formats  Resolution depends on the representation format and the measuring range  Measured value acquisition with 16-bit resolution  Point-to-point and multi-drop connections possible  A hand-held operator panel can be connected  A maximum of 5 HART devices can be connected per channel  Polling and burst modes  FDT/DTM support Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918918835 Weight per Piece (excluding packing) 134.000 g Custom tariff number 85389091 Country of origin Germany 02/27/2020   Page 1 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 48.8 mm Height 135 mm Depth 71.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Color green Net weight 134 g Operating mode Process data operation with 2 words, PCP with 2 words Diagnostics messages Failure of the internal I/O supply Yes I/O error Error message in the process data User error Error message in the process data Interfaces Designation Inline local bus No. of channels 2 Connection method Inline data jumper Transmission speed 500 kbps Transmission physics Copper Inline potentials Designation Communications power (UL) Supply voltage 7.5 V DC (via voltage jumper) Current consumption typ. 95 mA max. 110 mA Designation Supply of analog modules (UANA) Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption typ. 50 mA max. 150 mA 02/27/2020   Page 2 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Technical data Inline potentials Power consumption typ. 1.9 W Analog inputs Description of the input Differential inputs, current Input name Analog inputs Number of inputs 2 Connection method Inline shield connector Connection technology 2-wire Note regarding the connection technology shielded A/D conversion time approx. 10 µs (bus-synchronous) A/D converter resolution 16 bit Limit frequency (3 dB) 25 Hz Type of protection Surge protection Data formats IB IL, standardized representation, PIO Measuring principle Successive approximation Measured value resolution 16 bits (15 bits + sign bit) Measured value representation 16 bit two's complement Current input signal 4 mA ... 20 mA 0 mA ... 25 mA Input resistance current input 250 Ω Common mode voltage range signal - ground 40 V (between current input and functional earth ground) Electrical isolation Test section 7.5 V supply (bus logic), 24 V supply UANA / I/O 500 V AC 50 Hz 1 min. 7.5 V supply (bus logic), 24 V supply UANA/functional earth ground 500 V AC 50 Hz 1 min. I/O / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Connection in acc. with standard CUL Protection class III (IEC 61140, EN 61140, VDE 0140-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 02/27/2020   Page 3 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Connection diagram Connection of active and passive sensors (slaves) in 2-conductor technology with shield connection 02/27/2020   Page 4 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Connection diagram Connection of sensors (slaves) in a multidrop network 02/27/2020   Page 5 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Dimensional drawing 02/27/2020   Page 6 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Block diagram Classifications eCl@ss eCl@ss 4.0 27250300 02/27/2020   Page 7 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Classifications eCl@ss eCl@ss 4.1 27250300 eCl@ss 5.0 27250300 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 UNSPSC 21.0 32151602 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals UL Listed / cUL Listed / ATEX / UL Listed / cUL Listed Approval details 02/27/2020   Page 8 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 cULus Recognized       Accessories Accessories Device parameterization Software - AX+ BASIC - 2985068 Software CD for FDT container for integrating device DTMs (free download)     Labeling panel Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Plug Inline shield connector - IB IL SCN 6-SHIELD-TWIN - 2740245 Inline shield connector     02/27/2020   Page 9 / 10 https://www.phoenixcontact.com/gb/products/2862149 Inline terminal - IB IL AI 2-HART-PAC - 2862149 Accessories Inline shield connector - IB IL SCN-6 SHIELD - 2726353 Inline shield connector     Programming Software - AX DTM LIB - 2988065 DTM library     Terminal marking Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert, lettering field size: 62 x 10 mm, Number of individual labels: 72     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/27/2020   Page 10 / 10